Powering on/off the SafeDistance Badge
Power SafeDistance Badge on: Long press the button for 4 seconds. The red LED flashes 4 times, and the green LED is on.
Power SafeDistance Badge off: Long press the button for 4 seconds. The red LED is on for 4seconds and then off.
Power SafeDistance Badge reboot: LED status is the same as powering on. The red LED flashes 4 times, and the green LED is on.
The button to control the SafeDistance badge is situated on the front side, where the red circle in the photo above is at.
Connecting the badge to the private network
SafeDistance Badge is connecting to the LoRaWAN network: the green LED is on during joining.
When the button is pressed once when the SafeDistance Badge is connected:
- Successfully connected: The green LED is on for 2 seconds.
- Not able to connect: The green LED is off.
- Press the button 3 times to reconnect the SafeDistance Badge to the network. The green LED blinks 3 times.
Charging
SafeDistance Badge is charging: The red LED flashes every second.
SafeDistance Badge is done charging: The red LED is on. Press the button once to acknowledge when plugging out.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article